Even if you don’t use your system as much as you used to, it might be stressful when the Laptop won’t turn on.
In many cases, it’s due to no fault of the user. It’s morning, and you wake up to find that your laptop won’t start. Despite your continuous attempts to wake up the computer, nothing happens. There was nothing wrong when you shut down your laptop earlier, and you know that it is fully charged. Before dismissing the equipment as unusable, take a big breath and acknowledge that this is a common problem. This is due to various factors, all of which we will discuss to assist you in resolving.
Learn why your laptop won’t start and how to prevent this from happening again in the following sections.
Right solution for the laptop won’t turn on
- Make that the power supply is working properly. This may seem obvious, but double-check that you haven’t plugged in the wrong power supply. The majority of laptop AC adapters look the same. Your laptop will not use the adapter if it does not have the correct voltage and amperage. A laptop’s power light is an indication that the power source is functioning. An issue with the laptop’s battery may be indicated if both the laptop’s power light and the adapter’s power light are on.
- Make sure it isn’t a screen problem before you proceed. The most common mistake is to think that your laptop is off because the screen is black. If you’re using an external display, turn the volume up first. Remove the extra display and see if your desktop appears on the laptop’s primary screen instead. If not, you can raise the brightness by using the keyboard’s brightness function key. Do some troubleshooting by connecting a different external monitor to your laptop’s HDMI or other visual output port.
- Get rid of any bootable drives. Using a USB stick or DVD to launch your laptop and then forgetting to remove it could lead to booting issues.
- Disconnect from any charging points that you may be using. A malfunctioning docking station’s power port or power supply can cause problems when you try to start your laptop.
- Connect the power adapter straight to your laptop after disconnecting the docking station from your PC. The docking station must be replaced if your laptop can start.
- If you hear anything that sounds like it is beeping, pay attention to it. A sequence of beeps may be heard if a laptop motherboard component fails. Beeps are a code that can assist you to detect a malfunctioning component. You can learn more about your laptop’s make and model by looking up the number of beeps on the manufacturer’s website.
- Perform a hard restart if that doesn’t work. You may have experienced an electric shock if your laptop unexpectedly shut down while using it. This could be due to the safety feature incorporated into newer motherboards. This is for the sake of preventing electrical overload on the system’s more delicate components.
- Eliminate the battery, disconnect the power adapter, and press and hold the power button for 30 seconds to remove any remaining voltage. Wait 30 seconds before reconnecting the power adapter and turning on the system.
- After reinstalling the battery, if the laptop still doesn’t switch on, you probably have a bad battery and need to buy a new one.
- Ensure that all of the air intakes and exhausts for the HVAC system are free of obstructions. When a component—most commonly the CPU—gets too hot, a built-in safety circuit shuts down the power to the laptop. Using a laptop on a cushion or sofa or any other surface that blocks the laptop’s cooling vents is the most prevalent cause of overheating. Stay away from this if you want to keep your laptop from overheating.
Technical solution related to Computer OR Laptop
Some additional tips
Clean all vents in your laptop casing as well, like hair, dust, and other debris can cause overheating if they’re left in the vents for long periods.
The CMOS battery should be changed. Batteries are used to power the CMOS, responsible for loading the operating system and all other input and output components when the laptop is booted.
The laptop will not boot if the battery is low. A CMOS battery replacement can be done at home if the user is familiar with opening the casing. On the other hand, the majority of people choose to get it replaced by a qualified professional.
Reinstall any parts that have been recently installed—installed new RAM or a new hard drive not long ago? If your laptop doesn’t start right away, you might have a problem with the new hardware.
To acquire a working replacement, return the old component or send the new one back to where you purchased it for testing.
Checking your hardware may be necessary if you’re still having trouble turning on your laptop. Installing a new RAM kit, for example, could be the cause of your laptop failing to boot properly. All new hardware should be removed from the laptop and the machine rebooted in this situation.
Go to a repair shop for the laptop. If none of those mentioned above methods worked to restore your laptop’s functionality, you might be dealing with a malfunctioning component on the motherboard. If your laptop is still covered by its manufacturer’s warranty, sending it in for service is your best bet; otherwise, you can get it repaired by a third party.
Final Words
I realize why this issue of “laptop won’t turn on” is especially worrying to you if you use your laptop for work. The best course of action for an outdated laptop would be to upgrade to a newer one. These are also the primary reasons why you should make backups of your data, as problems like this can easily harm your data.
